Printing Costs

Because it is crucial to know what the printing costs will be, we prepared this page, which you can use to learn about approximate costs of printing with Sinterit Lisa PRO, Lisa X and NILS 480.

How this was calculated?

The calculation is based on the optimum density of the printout package. We calculated the 22% refresh ratio. Calculation is based on Sinterit PA12 Smooth powder.

Direct powder – Powder that is sintered during the printing process and becomes the printed part.

Refresher – Powder needed to refresh the unsintered powder, after the printing process.

This is the cost of PA12 Fresh powder needed to regenerate powder for the next printing process.

Material
Printer
Material
Printer
Model
Full bed
Printing Costs

Pricing

Below there are approximate costs for some example models.
Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.
  • Flexible
  • Standard
Model
Dimensions
PA12
Smooth
PA11
Onyx
Flexa
Grey
Flexa
Bright
Flexa
Soft
TPE
Below
Model volume:
Model volume:
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
49,90 €
49,90 €
49,90 €
49,90 €
49,90 €
49,90 €
Derailleur
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
71,80 €
71,80 €
71,80 €
71,80 €
71,80 €
71,80 €
Driller housing
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
157 €
157 €
157 €
157 €
157 €
157 €
Model
Dimensions
PA12
Smooth
PA11
Onyx
Flexa
Grey
Flexa
Bright
Flexa
Soft
TPE
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €

Get a free sample box

Universal joint + turbine
The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

These are examples showing high precision and freedom of design ensured by SLS technology.
order free sample box
Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.
SEE ADVANCED samples
This product includes GeoLite2 data created by MaxMind, available from https://www.maxmind.com.