Sandblaster

Perfectly smooth surface

Using dry Abrasive Material, the Sandblaster is designed for cleaning, polishing, and finishing printouts.
Clean your prints safely, conveniently – and fast

CLEAN

HEPA filtration and full sealing maintain a dustless environment around the Sandblaster SLS and allow you to post-process while avoiding contact with the powder
Sandblaster SLS is compatible with the ATEX Vacuum Cleaner. Using a special vacuum environment, our unique system separates the abrasive and powder while also removing powder from the chamber

PRECISE

Smooth pressure regulation promotes thorough cleaning of even the smallest and most delicate prints.
The additional manual blasting gun ensures precision, while the wall-mounted blasting nozzle makes it possible to freely rotate objects.The low-mesh grill allows you to work with a series of prints while preventing small parts from getting inside the device.

SPACIOUS

Large working area: 410 x 310 x 200 [mm]
The industrial cabinet makes working on large prints more convenient and allows them to be conveniently rotated. The whole device is designed to ensure the most convenient work with SLS printouts from Sinterit SLS 3D printers.

Pressure regulation and metering

The built-in pressure meter will help you to set all work parameters precisely. Maintaining the right pressure is crucial particularly if you’re post-processing elements with tiny details

Webinar

Q&A – Ask Us Anything about post-processing

Specification

Working area
410 x 310 x 200 [mm] (16,1 x 12,2 x 7,9 [in])
Max. pressure
125 [psi] / 8.62 [bar]
Coupling
DN 7.2
Max. abrasive material capacity
4.5 kg [9.9 lbs]
Dimensions
495 x 390 x 410 [mm] / 19.5 x 15.4 x 16.1 [in]
Weight
11.5 [kg] / 25.3 [lb]
Power
6 [W]
Input voltage
230 [V] / 50 [Hz] or 110 [V] / 60 [Hz]
Abrasive material
glass balls 200 [μm]
Required Air flow
300 L/min
Required Pressure
0.5 – 0.86 [MPa] / 5.0 – 8.6 [bar] / 87.0 – 124.7 [psi]
Full specification (PDF)
Sinterit-SANDBLASTER-SPECIFICATION-1.pdf

Find your local distributor

Sinterit printers are available worldwide thanks to our distribution network. Choose the one closest to you and check out Sinterit printers in person.

Comparison

Sandblaster
Sandblaster SLs
Sandblaster
Sandblaster SLS
Type
Manual
Manual
Working area
410 x 310 x 200 [mm] (16,1 x 12,2 x 7,9 [in])
675 x 450 x 415 [mm] (26.6 x 17.7 x 16.3 [in])
Max. pressure
0.86 MPa / 125 psi
5.0 – 8.6 [bar] / 72.5 – 125.0 [psi]
Coupling
DN 7.2
DN 7.2
Dimensions
480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in)
790 x 545 x 765 [mm] (31.1 x 21.5 x 30.1 [in])
Weight
15 [kg] (33 [lbs])
30.5 [kg] (67.1 [lbs])
Illumination
Power
6 [W]
6 [W]
Input Voltage
230 [V] / 50 [Hz] or 120 [V] / 60 [Hz]
110 / 230 [V] AC, 50/60 [Hz]

Interested in?

Let's talk just a friendly no-pressure quick chat


* Information about the processing of your personal data provided to Sinterit by the contact form is here. To read all our Privacy Policy please click here.

































Philippe Bendel
Additive Manufacturing Development Leader – Somfy

The main reason Somfy reached out for the SLS technology from Sinterit was productivity. Printing many pieces in one batch was a game-changer

Alec Bialek
Head of Jetson’s R&D

When we look at Lisa’s line of printers, or Sinterit at general compared to other companies, the two major things that we liked were the materials, that are open source, so we are not locked into one brand […]. We are able to look around the market and use a material that works best for the part.

Rigo Herold
Professor Dr.-Ing., Zwickau University in Germany

It was the best choice for me to fulfill all requirements: possibility to print complex structures, price, speed, reliability.

Maurice Briggs
Director at Lazerthrust

Sinterit LISA is the most accessible means to produce precise constraint-free solutions to modern problems. The technology does what it says on the tin and the team at Sinterit is dedicated to working with their customers to achieve their objectives.

Peter Benthues
H. Gautzsch Firmengruppe

For a company at the beginning of an investigation, support from, and discussion with the technology experts is extremely beneficial. The LISA is one of the few economically feasible solutions in the first stages of any AM Strategy. At lower volumes, it is a perfect solution.

Lluís Llenas
Regner

The FFF and SLA parts are a good choice to get a physical impression of the designs and to assemble rough prototypes. But when it comes to producing reliable prototypes to be verified in our fatigue tests or to send functional samples to our customers for validation, SLS is the only acceptable choice.

Walter Pucheanu
R&D Technician
Department of Chemical and Biological Engineering (CBI) / University of Erlangen–Nuremberg

The print quality of the Lisa PRO is impressive.

Sean Higgins
Nabson Inc.

In order to keep up with our production demand, we have been operating the Lisa PRO almost 7 days a week for the past couple of months, without incident, and produced over 1500 sleeves.

Contact us via a form















    Sinterit sp. z o.o. is the controller of your personal data.
    Providing your data is voluntary, but your refusal to provide us with data marked as mandatory (*) will make us unable to communicate with you via our contact form.

    You have the right to request from the Company access to and rectification or erasure of your personal data or restriction of processing concerning your personal data and to object to processing as well as the right to data portability. You have the right to withdraw your consent for processing of your personal data at any time, without affecting the lawfulness of processing based on consent before its withdrawal.

    To read all our Privacy Policy please click here

    (Optional) I want to subscribe to the Sinterit newsletter
    If you subscribe to our newsletter we may process your data (both in and outside EU) to send you informational or marketing content. Providing your data is voluntary, but your refusal will make us unable to send you our newsletter.

    (Optional) I agree for my data to be shared with Sinterit distributors and resellers (both in and outside EU) so they can contact me with their offers as well as send me their content.
    If you agree for your data to be shared with our distributors or resellers they may also become controllers of your data. They may process your data (both in and outside EU) to contact you with their offers and to send you their informational or marketing content. Providing your data is voluntary, but your refusal will make us unable to share your data with our distributors and resellers and to contact them with you.

















    [lc_medium]
















    Knowledge

    Resources

    Sandblaster
    Check the full specification
    DOWNLOAD

    Pricing

    Below there are approximate costs for some example models.
    Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.
    • Flexible
    • Standard
    Model
    Dimensions
    PA12
    Smooth
    PA11
    Onyx
    Flexa
    Grey
    Flexa
    Soft
    TPE
    Below
    Model volume:
    Model volume:
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    49,90 €
    49,90 €
    49,90 €
    49,90 €
    49,90 €
    49,90 €
    Derailleur
    Model volume:
    28.12 cm^3
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    71,80 €
    71,80 €
    71,80 €
    71,80 €
    71,80 €
    71,80 €
    Driller housing
    Model volume:
    28.12 cm^3
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    157 €
    157 €
    157 €
    157 €
    157 €
    157 €
    Model
    Dimensions
    PA12
    Smooth
    PA11
    Onyx
    Flexa
    Grey
    Flexa
    Soft
    TPE
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €

    Get a free sample box

    Universal joint + turbine
    The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

    These are examples showing high precision and freedom of design ensured by SLS technology.
    order free sample box
    Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
    ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.
    SEE ADVANCED samples
    This product includes GeoLite2 data created by MaxMind, available from https://www.maxmind.com.