Media mentions

Check out the latest media mentions about Sinterit.

Sinterit in media

Il Replicatore | Abbiamo visitato il nuovo stabilimento di Sinterit a Cracovia, in Polonia
Sono passati quasi 2 anni e mezzo dall’ultima volta che abbiamo visitato lo stabilimento di Sinterit a Cracovia e tutto è cambiato. Non solo per i drammatici effetti del COVID e della guerra appena oltre il confine con l’Ucraina, ma anche e soprattutto per come l’azienda è stata in grado di affrontare questi eventi e di uscirne dall’altra parte.
READ ON THE EXTERNAL WEBSITE
3DPMN | We visited the new Sinterit facility in Cracow, Poland
It has been nearly 2 and half years since we last visited the Sinterit facility in Krakow and everything has changed. Not just for the dramatic effects of COVID and the war just beyond the border with Ukraine, but also and especially for how the Polish company has been able to navigate these events and come out on top on the other side, with two brand new printers, the Lisa X and NILS, ready to open up new SLS markets.
READ ON THE EXTERNAL WEBSITE
PMM | Sinterit's new printer is 10x faster
Kraków, Poland-based Sinterit manufactures selective laser sintering (SLS) 3D printers in the compact and industrial-sized range. All its printers offer an open printing system, with 32 parameters that users can adjust to optimize their prints, and the ability to use third-party materials for printing. Sinterit sells its printers in the U.S. through a partner network.
READ ON THE EXTERNAL WEBSITE
PMM | Sinterit launches industrial line of 3D printers
Sinterit, based in Kraków, Poland, recently introduced its Nils 480, a new selective laser sintering (SLS) 3D printer designed for manufacturers looking to print more production parts quickly.
READ ON THE EXTERNAL WEBSITE
3dprint.com | Sinterit on SLS 3D Printing
Join Sinterit at 10 am EST on Wednesday, April 13th, to learn “All you want to know about SLS technology” in this Q&A webinar. Attendees can ask all of their questions about SLS 3D printing technology, and Sinterit’s panel experts will answer them directly. These experts are Sinterit’s CMO Jarek Pieniazek, Application Engineer Michał Niemas, and International Channel Manager Radek Antosz. Additionally, two experts from BASF Forward AM, Valentin Holz and Stefan Josupeit, will join as well.
READ ON THE EXTERNAL WEBSITE
3D EDU | Nowy PHS od Sinteritu
Rosnące zapotrzebowanie na większe i szybsze drukarki 3D SLS – Lisa X i Nils 480 skłoniło Sinterit do wprowadzenia nowej wersji popularnego PHS. Wraz z ogromnym wzrostem objętości proszku, który można wydrukować od razu, postprocessingowi i obsłudze proszku z nowym, szybszym PHS.
READ ON THE EXTERNAL WEBSITE
3DON | Czy technologia SLS jest wystarczająco elastyczna?
Pojawienie się druku 3D dało wielu firmom impuls do wejścia w ten rynek i odnalezienia swojej niszy. Jedną z nich są tzw. service providerzy, czyli firmy świadczące usługi druku 3D dla innych podmiotów, nieposiadających na stanie własnych drukarek. Nisza providera jest ciekawa, ale wymagająca i trzeba wiedzieć jak w nią wejść, żeby osiągnąć sukces rynkowy.
READ ON THE EXTERNAL WEBSITE
Fabbaloo | Sinterit widens US operations
Sinterit announced it has fully opened operations in the US. The Kraków-based company produces a line of well-regarded low-cost SLS 3D printers. These devices can print both prototype or end-use parts in nylon materials, and also offers an “open materials” program for those wishing to use other thermoplastic powders not currently in the company’s materials catalog.
READ ON THE EXTERNAL WEBSITE
Plast News | Druk 3D w technologii SLS zwiększa bezpieczeństwo saperów
Deep Analytics to amerykańska firma badawcza, która opracowuje innowacyjne i wytrzymałe prototypy dla ośrodków zajmujących się bezpieczeństwem i obroną. Zespół dziesięciu inżynierów i naukowców z siedzibą w Vermont opracowuje inteligentne czujniki, które wykorzystując najnowocześniejsze technologie machine learning, są gotowe do użycia w terenie. Pomaga im w tym Lisa PRO z Sinteritu.
READ ON THE EXTERNAL WEBSITE
3D Printing Industry | Sinterit signs cooperation agreements with three new partners
Polish 3D printer manufacturer Sinterit has also made several recent business announcements, having signed cooperation agreements with three new partners and opened its new facility in the US. The firm will be represented in the US by new resellers Impac System Engineering in the South, Vision Miner in the West, and Master Graphics in the Midwest.

The firm has also opened a new warehouse facility on the East Coast which will help it to accelerate delivery times to its target customers, and “facilitate formalities to international transport.”
READ ON THE EXTERNAL WEBSITE
3dprint.com | New Option for Engineers Looking for a Reliable 3D Printer for Difficult Times
The need for a reliable 3D printer increases when the continuity of supply chains becomes uncertain. Engineers and designers must be 100% sure that parts they have developed are production-ready before they order the first delivery of components.

Lots of companies are adopting SLS 3D printing technology, as it is now more available thanks to the growing number of compact SLS 3D printers. One of those companies is REGNER, a well-known OEM provider of motion control solutions, from control boxes to linear actuators, that bases its success on providing world-class support in a market that moves very quickly. Their products are widely used in the healthcare market.
READ ON THE EXTERNAL WEBSITE
3dprint.com | 3D Printing Webinar and Event Roundup: March 27, 2022
To learn about what’s been called the fastest compact SLS 3D printer, join the Sinterit webinar at 12 pm EST on the 29th, “Meet Lisa X – No1 in compact SLS printers speed.” Hosted by Sinterit Channel Manager Jakub Kralka and Valentin Holz from BASF Forward AM, attendees will learn all about the key features of the Lisa X, including its fast speed, large volume, open environment, easy operation, post-processing, and more.
READ ON THE EXTERNAL WEBSITE
3D Printing Media Network | Sinterit establishes new local resellers and grows in the US
Continuing to grow in the US market, Sinterit signed a cooperation agreement with three more partners: Impact System, Master Graphics, and Vision Miner, and opened its new facility in the US. “Opening a warehouse in the United States accelerates the delivery time to target customers and facilitates many formalities related to international transport. Customers who chose Sinterit products will now have easier access to them”, said Maxime Polesello, CEO of Sinterit.
READ ON THE EXTERNAL WEBSITE
3druck.com | Sinterit weitet Geschäft mit neuen Resellern in den USA aus
Um auf dem US-Markt weiterzuwachsen, hat der polnische 3D-Drucker–Hersteller Sinterit eine Kooperationsvereinbarung mit drei weiteren Partnern unterzeichnet: Impact System, Master Graphics und Vision Miner, und eröffnete eine neue Niederlassung in den USA.
READ ON THE EXTERNAL WEBSITE
3d.edu.pl | Londyńczycy drukują w 3D kostiumy do sztuki "Farewell My Concubine"
Studenci używają drukarki 3D Sinterit Lisa SLS do tworzenia kostiumów do przedstawienia „Farewell My Concubine” w Operze Pekińskiej.

Łącząc chińską tradycję z nowoczesną technologią, opera będzie prezentować kostiumy drukowane w 3D przy użyciu drukarki Sinterit Lisa. Ta jedyna w swoim rodzaju maszyna oferuje przemysłową moc selektywnego spiekania laserowego w formie drukarki desktop[owej. Polska drukarka 3D jest w stanie zaoferować drukowanie bez użycia podpór w wyjątkowo wysokiej jakości.

Doktoranci RCA Mingjing Lin i Tsai-Chun Huang opracowali projekty w ramach projektu „Fold the Inter-fashionionality”, który łączy technologię z tradycyjnym rzemiosłem.
READ ON THE EXTERNAL WEBSITE
Evertiq | Signis kupił Sinterit Lisa PRO set oraz zamówił NILS 480
"... Rozbudowano także dział maszyn SLS (selektywny laserowy spiek proszków poliamidowych). Zakupiono Sinterit Lisa Pro wraz z całą stacją obróbki wydruków. Natomiast na drugi kwartał tego roku planowany jest odbiór maszyny produkcyjnej Sinterit NILS."
READ ON THE EXTERNAL WEBSITE
Il Replicatore | Nuova stazione di trattamento delle polveri di Sinterit
La crescente domanda di stampanti 3D SLS più grandi e veloci, Lisa X e Nils 480, hanno spinto Sinterit a lanciare una nuova versione del popolare PHS. Con l’enorme aumento del volume di polvere che potrebbe essere stampato in una volta, la post-elaborazione e la gestione della polvere con il nuovo PHS più veloce.

La produzione additiva non è solo la stampa 3D, ma un processo con molti passaggi diversi ma relativamente importanti. La post-elaborazione è una delle più importanti. Soprattutto nella tecnologia SLS quando si opera con polvere che potrebbe essere riutilizzata, quindi la capacità di recuperare il più possibile è fondamentale. Il processo dovrebbe essere pulito e veloce.
READ ON THE EXTERNAL WEBSITE
FAC FOX | New Powder Handling Station from Sinterit 3D Printer
he growing demand for bigger and faster SLS 3D printers – Lisa X and Nils 480 challenged Sinterit to launch a new version of the popular PHS. With the tremendous increase in powder volume that could be printed at once, the postprocessing and powder handling with new, faster PHS.

Additive manufacturing is not just 3D printing, but a process with a lot of different but comparably important steps. Postprocessing is one the most important of it. Especially in SLS technology when you operate with powder that could be reused so the ability to retrieve as much as possible is crucial. The process should be clean and fast.
READ ON THE EXTERNAL WEBSITE
3D Printing Media Network | New powder handling station from Sinterit
The growing demand for bigger and faster SLS 3D printers – Lisa X and Nils 480 challenged Sinterit to launch a new version of the popular PHS. With the tremendous increase in powder volume that could be printed at once, the postprocessing and powder handling with new, faster PHS.

Additive manufacturing is not just 3D printing, but a process with a lot of different but comparably important steps. Postprocessing is one the most important of it. Especially in SLS technology when you operate with powder that could be reused so the ability to retrieve as much as possible is crucial. The process should be clean and fast.
READ ON THE EXTERNAL WEBSITE
PMM | Latest Sinterit printer has larger build volume, fast ROI
Nils 480Sinterit’s latest industrial selective laser sintering (SLS) printer can create complex geometries without support structures from a wide range of materials, including highly durable, elastic and temperature-resistant resins. 3D Herndon distributes Sinterit printers in the U.S. for the Kraków, Poland, manufacturer.
READ ON THE EXTERNAL WEBSITE
3dprint.com | Sinterit Announces VP of Sales and Marketing for the US
LS 3D printer producer Sinterit announced that it has expanded its activity in the United States by hiring Tim Sheehan as its VP of Sales and Marketing in the country. Sheehan, formerly VP of Global Sales for Nano Dimension, will lead Sinterit’s continued expansion in the US and help to build up its reseller network here as well. The company’s CEO, Maxime Polesello, explained that Sheehan knows the market, as well as what clients need, which is why he’s the right person for the job.
READ ON THE EXTERNAL WEBSITE
3d.edu.pl | Sinterit rozwija się w USA z Timem Sheehanem jako wiceprezesem.
Sinterit, założony w Polsce, znany jest jako ekspert w dziedzinie produkcji drukarek 3D w technologii SLS. Pomyślne wprowadza na rynek urządzenia kompaktowe i przemysłowe. Firma posiada obecnie najszersze portfolio produktów w tym sektorze rynku. „Wierzymy, że Tim Sheehan jako wiceprezes odpowiedzialny za sprzedaż i marketing w Stanach Zjednoczonych, jest odpowiednią osobą, która pomoże prowadzić i rozbudowywać nasz biznes. Tim zna rynek, a co ważniejsze – potrzeby klientów” – powiedział Maxime Polesello, CEO Sinterit. „Sinterit jest pionierem kompaktowych rozwiązań druku 3D SLS. Od początku wizją firmy było zapewnienie dostępu do tej zaawansowanej technologii firmom na całym świecie. Dziś osiągamy ten cel w wielu sektorach rynku, takich jak edukacja, klienci komercyjni oraz instytucje rządowe”.
READ ON THE EXTERNAL WEBSITE
All3dp | The Best SLS 3D Printers of 2022 – Buyer’s Guide
We mentioned last year how Sinterit, a Polish 3D printer manufacturer, had built on its previous Lisa machine and introduced the Sinterit Lisa Pro. Well, now they’ve done it again with the launch of the Lisa X.

Lisa X takes what made the Lisa Pro good and makes it better. After her makeover, Lisa now offers a larger maximum print size (180 x 130 x 300 mm), a more powerful laser (30W vs. 5W), a wider material selection, and much faster print speeds. The new printer is up to 12 times faster than the Lisa Pro and can finish most print jobs in 24 hours, according to the manufacturer.
READ ON THE EXTERNAL WEBSITE
3dprint.com | 3D Printing Webinar and Event Roundup: March 13, 2022
On Tuesday, March 15th, at 10 am, Sinterit will hold another webinar about its industrial SLS 3D printer, the NILS 480, which the company calls a game-changer. During the webinar, which has been pre-recorded, attendees will learn about the price of the NILS 480, along with its size and speed, in addition to possible ROI calculations and applications for the system. At the end of the webinar, Sinterit Channel Manager Jakub Kralka will answer audience questions.
READ ON THE EXTERNAL WEBSITE
Fabbaloo | Sinterit Partners With Forward AM
Sinterit announced a partnership with Forward AM, the AM unit of BASF.

BASF is the largest chemical producer on the planet, with annual revenues exceeding €60B (US$68B). In the past few years the company has taken a very strong interest in additive manufacturing, and has partnered with countless players in the 3D space. So much activity was underway that BASF spun it out under the Forward AM banner. Forward AM now provides a wide variety of AM services, ranging from consulting, design, printing and materials development.
READ ON THE EXTERNAL WEBSITE
3D Printing Industry | NEW 3D PRINTING HIRES AT SINTERIT
Polish 3D printer manufacturer Sinterit has appointed Tim Sheehan as its new VP of Sales and Marketing for the United States. Hired with the goal of helping the firm expand its business in the lucrative US manufacturing market, Sheehan will lead its partnership activities in the country, and work to build its reseller network there.
READ ON THE EXTERNAL WEBSITE
3druck | Topologie- und Kostenoptimierung mit SLS 3D-Druck
HARTING Applied Technologies baut modernste Montagemaschinen nicht nur für die HARTING Technologiegruppe, sondern auch für externe Kunden beispielsweise aus der Möbelindustrie. Der Werkzeug- und Sondermaschinenbauer erstellt dabei regelmäßig Formen, um elektrische Steckverbindungen mittels Kunststoffspritzguss und Druckguss produzieren zu können. Dabei setzt das Unternehmen auf den LISA Pro 3D-Drucker von Sinterit, um funktionale Prototypen, Testmuster für Maschinenteile, einfache Befestigungselemente und Objekte mit integrierten Funktionen zu erstellen. In den letzten beiden Jahre konnte der Sondermaschinenbauer viel Wissen und Erfahrung für optimale Ergebnisse aus dem Lisa Pro 3D-Drucker sammeln.
READ ON THE EXTERNAL WEBSITE
3DON | Jak zmniejszyć ryzyko urazu przy pracy fizycznej dzięki drukowi SLS 3D?
Kontuzje, urazy, a docelowo niezdolność do pracy, to częste bolączki osób pracujących w ogrodnictwie, na liniach montażowych oraz wykonujących prace budowlane. 3P Support, wykorzystując technologię 3D dostarczaną przez polską firmę Sinterit, znalazło rozwiązanie tego problemu.
READ ON THE EXTERNAL WEBSITE
3D Printing Media Network | Sinterit expands in the USA with Tim Sheehan as VP
Sinterit, founded in Poland, is known as an expert in the field of producing SLS 3D printers. Successfully launching compact and industrial model printers. Sinterit currently has the widest product portfolio in the SLS market sector. “We believe that having Tim Sheehan on board as the V.P. of Sales and Marketing in the US is the right person to help drive and build Sinterit business. Tim knows the market, and what is more important – the clients’ needs” – said Maxime Polesello,
READ ON THE EXTERNAL WEBSITE
3druck | 3D-Drucker-Hersteller Sinterit erweitert seine Tätigkeit in den USA
Der polnische 3D-Drucker–Hersteller Sinterit hat Tim Sheehan zum V.P. für Vertrieb und Marketing in den USA ernannt. Tim Sheehan wird die Aktivitäten zur Ausweitung der Sinterit-Partnerschaft in den USA leiten und ein Reseller-Netzwerk aufbauen.
READ ON THE EXTERNAL WEBSITE
3printr | Sinterit expands activity in the United States
Sinterit is pleased to announce Tim Sheehan, as V.P. of Sales and Marketing for the United States. Tim will lead Sinterit partnership expansion activities in the USA and build the reseller network.
READ ON THE EXTERNAL WEBSITE
3D Adept Media | Sinterit et Forward AM vont développer des matériaux et du matériel pour des applications industrielles en impression 3D SLS
L’une est connue comme l’une des principales entreprises qui développe et commercialise des machines d’impression 3D SLS, l’autre est l’une des plus grandes entreprises d’impression 3D qui développe des matériaux pour plusieurs technologies de FA. Ensemble, elles travailleront au développement de nouveaux matériaux et matériels, et exploreront les applications industrielles qui peuvent être réalisées grâce à l’impression 3D SLS. Il s’agit de Sinterit et Forward AM.
READ ON THE EXTERNAL WEBSITE
Love Krakow | Ile osób zatrudniają krakowskie start-upy?
Ponad 100 osób zatrudniają takie firmy, jak Brainly, Synerise, edrone czy Sinterit. W drugiej kategorii – 51-100 pracowników – znajdziemy spółki takie jak Autenti, Picodi, inFakt, Reality Games, Kontakt.io czy uPacjenta. Do grona zagranicznych start-upów zatrudniających w Krakowie powyżej 50 osób możemy zaliczyć Bidroom, Revolut, FLYR, Zendesk, Kitopi czy Azimo.
The most popular materials used in SLS 3D printing are nylons, particularly PA12. Sinterit provides materials to go along with their 3D printing equipment, and of course, they provide PA12. Another common material used in their systems is PA11. These two materials both offer very practical characteristics that are applicable in many situations.”
READ ON THE EXTERNAL WEBSITE
3D Printing Media Network | Sinterit enters strategic partnership with Forward AM
Sinterit, an expert in the compact SLS 3D printing segment, entered a partnership with Forward AM, the brand of BASF 3D Printing Solutions GmbH. The cooperation between companies is dedicated to jointly developing the compact SLS segment with related materials and hardware, as well as industrial applications.
The most popular materials used in SLS 3D printing are nylons, particularly PA12. Sinterit provides materials to go along with their 3D printing equipment, and of course, they provide PA12. Another common material used in their systems is PA11. These two materials both offer very practical characteristics that are applicable in many situations.”
READ ON THE EXTERNAL WEBSITE
Tech Teto | Aquila Biolabs deploys Sinterit’s Lisa Professional to enter the ‘Kanban’ 3D printing of biosensor components
German life science agency Aquila Biolabs GmbH has turned to Sinterit 3D printing in a bid to cut back the price of its low-volume biosensor half manufacturing runs.

Designed to research cell cultures and flow into fluids in lab exams, Aquila Biolabs’ proprietary bio-pumps and sensors are constructed to specification, that means that scaling their manufacturing would usually require an costly array of tooling. Nonetheless, by adopting the Lisa Professional 3D printer, the agency has now discovered a manner of flexibly producing customized components as they’re wanted, and embracing ‘Kanban’ stock management.
READ ON THE EXTERNAL WEBSITE
TCT Magazine | Small-format, big potential: Opportunities and challenges for affordable SLS 3D printing
Sinterit was founded by a trio of engineers – including CTO Michał Grzymała- Moszczyński – to address some of the problems it had identified in the design and manufacturing space. The solutions to those problems have come in the form of the Lisa for prototyping and education, and the Lisa Pro for functional prototypes and research, both of which fall under the $20k price banner, with the recently launched NILS 480 addressing industry needs. Across all three models, the company has installed 1,000 units.
READ ON THE EXTERNAL WEBSITE
PMM | Sinterit forms partnership with Forward AM
“The combination of Sinterit’s hardware and our SLS powders will enable customers to realize new industrial applications in reliable high quality. This step contributes to the continuous industrialization of additive manufacturing,” said Stefan Josupeit, head of business line powder bed fusion, BASF 3D Printing Solutions.
READ ON THE EXTERNAL WEBSITE
Centrum Druku 3D | INFORMACJE BRANŻOWE Sinterit nawiązuje strategiczną współpracę z BASF Forward AM
Krakowski Sinterit – producent desktopowych (a od niedawna również przemysłowych) drukarek 3D typu SLS , nawiązał współpracę z Forward AM – marką należącą do jednego z największych koncernów chemicznych świata – BASF 3D Printing Solutions GmbH. Współpraca pomiędzy firmami ma na celu wspólne rozwijanie segmentu kompaktowych SLS wraz z powiązanymi materiałami i sprzętem, a także zastosowaniami przemysłowymi.
READ ON THE EXTERNAL WEBSITE
3D Printing Industry | Aquila Biolabs deploys Sinterit's Lisa PRO to enter the "kanban" 3D printing of biosensor parts
Using its new Lisa Pro, Aquila Biolabs now 3D prints the LIS in PA12 pieces, including an internal skeletal structure containing its main electronics, and a barrel for the device’s outer housing. By switching to SLS production, the firm has effectively been able to simplify its workflow while dramatically increasing its throughput, and its revised setup allows it to produce up to 400 parts in a single run.
READ ON THE EXTERNAL WEBSITE

Pricing

Below there are approximate costs for some example models.
Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.
  • Flexible
  • Standard
Model
Dimensions
PA12
Smooth
PA11
Onyx
Flexa
Grey
Flexa
Bright
Flexa
Soft
TPE
Below
Model volume:
Model volume:
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
49,90 €
49,90 €
49,90 €
49,90 €
49,90 €
49,90 €
Derailleur
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
71,80 €
71,80 €
71,80 €
71,80 €
71,80 €
71,80 €
Driller housing
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
157 €
157 €
157 €
157 €
157 €
157 €
Model
Dimensions
PA12
Smooth
PA11
Onyx
Flexa
Grey
Flexa
Bright
Flexa
Soft
TPE
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €

Get a free sample box

Universal joint + turbine
The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

These are examples showing high precision and freedom of design ensured by SLS technology.
order free sample box
Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.
SEE ADVANCED samples
This product includes GeoLite2 data created by MaxMind, available from https://www.maxmind.com.