Free webinar: MultiPHS – ultimate SLS post-processing workstation. Changes, functions, and possibilities.

Contact support

For after-sales technical support please contact us using the form or phone:

After-sales technical support

Grzegorz Konwalinko Senior Support Specialist +48 570 702 886
Adam Klimczak Technical Support Specialist +48 570 702 999
Miłosz Janiszewski Technical Support Specialist +48 570 702 996

    Contact the after-sales support department










    Sinterit sp. z o.o. is the controller of your personal data.

    Providing your data is voluntary, but your refusal to provide us with data marked as mandatory (*) will make us unable to communicate with you and provide you with technical support.

    You have the right to request from the Company access to and rectification or erasure of your personal data or restriction of processing concerning your personal data and to object to processing as well as the right to data portability.

    To read all our Privacy Policy please click here.


    Pricing

    Below there are approximate costs for some example models.
    Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.
    • Flexible
    • Standard
    Model
    Dimensions
    PA12
    Smooth
    PA11
    Onyx
    Flexa
    Grey
    Flexa
    Bright
    Flexa
    Soft
    TPE
    Below
    Model volume:
    Model volume:
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    49,90 €
    49,90 €
    49,90 €
    49,90 €
    49,90 €
    49,90 €
    Derailleur
    Model volume:
    28.12 cm^3
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    71,80 €
    71,80 €
    71,80 €
    71,80 €
    71,80 €
    71,80 €
    Driller housing
    Model volume:
    28.12 cm^3
    Total print height:
    6.82 cm
    Dimensions:
    65 x 65 x 63 mm
    157 €
    157 €
    157 €
    157 €
    157 €
    157 €
    Model
    Dimensions
    PA12
    Smooth
    PA11
    Onyx
    Flexa
    Grey
    Flexa
    Bright
    Flexa
    Soft
    TPE
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    Crank
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    Model volume:
    28.12 cm^3
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €
    51,30 €

    Get a free sample box

    Universal joint + turbine
    The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

    These are examples showing high precision and freedom of design ensured by SLS technology.
    order free sample box
    Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
    ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.
    SEE ADVANCED samples
    This product includes GeoLite2 data created by MaxMind, available from https://www.maxmind.com.