Solutions

We understand that your 3D printing needs depend on applications, space, and budget available. This is why we offer a wide range of sets which cover the necessary steps and can be adjusted to your requirements.
Sets start from 13.990 €

Accessible end-to-end
SLS 3D printing solutions

Build your solution based on modules

While desiging our offer, we had in mind end-to-end user experience. You can choose not only from printers types but also all necesssary powder management and post-processing equipment, powders, software types or service options. It gives you more possibilities, freedom of choice, and make your process smoother. All can be adjusted to the space, printing needs and budget you have.

SLS 3D printing steps

Each category includes options for you. Learn more about all of them.

  • Performance Set
    BESTSELLER
  • Entry Set
  • Open Set
  • Industrial Set

Which solution is the best
for me?

When considering choosing the best set for you, you should take into account your needs related to frequency of printing, demand for 3D printed elements, and space possibilities. The more you print, the bigger and faster printer you will need and more working area you will need.

Rigo Herold
Professor Dr.-Ing., Zwickau University in Germany

It was the best choice for me to fulfill all requirements: possibility to print complex structures, price, speed, reliability.

Maurice Briggs
Director at Lazerthrust

Sinterit LISA is the most accessible means to produce precise constraint-free solutions to modern problems. The technology does what it says on the tin and the team at Sinterit is dedicated to working with their customers to achieve their objectives.

Joshua Rosen
ECA Medical

One of the main benefits of SLS is the ability to print complex geometry in quick succession to do rapid prototyping.

Peter Benthues
H. Gautzsch Firmengruppe

For a company at the beginning of an investigation, support from, and discussion with the technology experts is extremely beneficial. The LISA is one of the few economically feasible solutions in the first stages of any AM Strategy. At lower volumes, it is a perfect solution.

Lluís Llenas
Regner

The FFF and SLA parts are a good choice to get a physical impression of the designs and to assemble rough prototypes. But when it comes to producing reliable prototypes to be verified in our fatigue tests or to send functional samples to our customers for validation, SLS is the only acceptable choice.

Walter Pucheanu
R&D Technician
Department of Chemical and Biological Engineering (CBI) / University of Erlangen–Nuremberg

The print quality of the Lisa PRO is impressive.

Sean Higgins
Nabson Inc.

In order to keep up with our production demand, we have been operating the Lisa PRO almost 7 days a week for the past couple of months, without incident, and produced over 1500 sleeves.

Learn

Pricing

Below there are approximate costs for some example models.
Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.
  • Flexible
  • Standard
Model
Dimensions
PA12
Smooth
PA11
Onyx
Flexa
Grey
Flexa
Bright
Flexa
Soft
TPE
Below
Model volume:
Model volume:
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
49,90 €
49,90 €
49,90 €
49,90 €
49,90 €
49,90 €
Derailleur
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
71,80 €
71,80 €
71,80 €
71,80 €
71,80 €
71,80 €
Driller housing
Model volume:
28.12 cm^3
Total print height:
6.82 cm
Dimensions:
65 x 65 x 63 mm
157 €
157 €
157 €
157 €
157 €
157 €
Model
Dimensions
PA12
Smooth
PA11
Onyx
Flexa
Grey
Flexa
Bright
Flexa
Soft
TPE
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
Crank
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
Model volume:
28.12 cm^3
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €
51,30 €

Get a free sample box

Universal joint + turbine
The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

These are examples showing high precision and freedom of design ensured by SLS technology.
order free sample box
Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.
SEE ADVANCED samples
This product includes GeoLite2 data created by MaxMind, available from https://www.maxmind.com.