Lisa X

Icon of the open printing parameters Lisa Pro

Open architecture

Our system is built around the idea of full openness. We give users maximum control over printing parameters. This allows them to adjust for specific print requirements, print with 3rd party materials (or develop their own) and in general have a more agile approach to 3D printing.

Multi material

A consequence of open architecture – multi-material approach means a wide range of available printing powders to cover various application needs, easy material changeover between jobs, and the ability to develop printing powders of your own.

Industrial speed and build volume

Printing speed of up to 14 mm/h is competitive with industrial-level printers while maintaining a compact size. Combined with a large build volume this makes prototyping or small batch-production possible with much smaller investmen

Industry 4.0 ready

LisaX is the first Industry 4.0-ready compact SLS 3D printer on the market. Connect the printer seamlessly with your production managing platform and line and control it with ease via API. Open the road to EU development funding where Industry 4.0 compatibility is a common requirement.

Outstanding quality

Printing with LisaX means smooth surfaces, great dimensional accuracy, and precision without compromises

Compact size

LisaX has one of the most impressive size-to-volume ratios on the market. The whole Performance set takes up less than 2m2 of the workspace.

Safe workspace

As a part of the Performance set, LisaX has an ATEX safety certification for working with powders. It means a safe workspace for all users.

Expert mode

More advanced users can switch the printer’s panel to expert mode. It allows for more control over the beds and recoater and lets you skip some of the guide screens.

TELL US MORE ABOUT YOUR APPLICATION BOOK A PRODUCT PRESENTATION

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

The main reason Somfy reached out for the SLS technology from Sinterit was productivity. Printing many pieces in one batch was a game-changer

SEE CASE STUDY

Alec Bialek

Head of Jetson’s R&D

When we look at Lisa’s line of printers, or Sinterit at general compared to other companies, the two major things that we liked were the materials, that are open source, so we are not locked into one brand […]. We are able to look around the market and use a material that works best for the part.

SEE CASE STUDY

Lluís Llenas

Regner

The FFF and SLA parts are a good choice to get a physical impression of the designs and to assemble rough prototypes. But when it comes to producing reliable prototypes to be verified in our fatigue tests or to send functional samples to our customers for validation, SLS is the only acceptable choice.

SEE CASE STUDY

GENERAL

Laser type

IR Fiber Coupled Diode Laser, 30[W]; λ = 976 ± 3 [nm] rated to > 30,000 hrs

Laser scanner type

Galvo

Dimensions

650x610x1200 [mm] (25.6×24.0x47.2 [in])

Weight

145 [kg] (319.7 [lbs])

PRINTER PARAMETERS

Max size of print diagonally

398 [mm] (15.7 [in])

Max print volume

TPU based / Flexible material: 130x180x340 [mm] (5.1×7.1×13.3 [in])
PA / PP: 130x180x330 [mm]
(5.1×6.7×13.3 [in])

Layer height (min – max)

0.075 – 0.175 [mm] (0.003 – 0.006 [in])

Build Speed

up to 14 [mm/h] (0.55 [in/h])

Inert gas control system

built-in

Average inert gas
consumption

0.48 [m3/h] = 8 [l/min.]

SOFTWARE

Supported file types

STL, 3MF, OBJ, 3DS, FBX, DAE

OS compatibility

Microsoft Windows 10 or higher

POWER

Operating voltage

230 [V] AC, 50/60 [Hz], 7.5 [A] or 100-120 [V] AC, 50/60 [Hz], 15 [A]

Average power consumption

0.85 [kW]

Max power consumption

1.65 [kW]

Compatible materials

PA12 Industrial

Standard Prototyping

Available

PA 12 Smooth

Standard Prototyping

Available

PA11 Onyx

Standard Prototyping

Available

PA11 CF (Carbon Fiber)

Performance & Special Applications

Available

PA11 ESD

Performance & Special Applications

Available

Polypropylene (PP)

Flexible

Available

Flexa Performance

Flexible

Available

PBT Optimal

Standard Prototyping

Available

HP USED

PROFILE ONLY

FAQ

The powder I’m interested in is not listed as compatible. Can I still use it?

Yes. The compatible powders are the profiles we provide with Sinterit Studio Advanced. They are tested by us and we can guarantee the results they’ll bring.

The open architecture of Sinterits solution allows users to edit existing profiles, and develop their own for non-compatible powders or even 3rd party materials. We recommend fixed profiles to inexperienced users, as the development requires time, knowledge, and resources, but with a confident R&D department it is entirely possible.

When in doubt contact us, and our team will advise you on the profile development.

How much can I print in a week?

The exact printing speed is dependent on a couple of factors, like layer height and build pack density. In almost all cases the whole process of printing, cooling, and post-processing takes up less than 24 hours, so you should be able to produce at least 5 full print beds per workweek.

Is the process complicated? How much training will my staff need?

The printing process is not complicated and can be learned in a short time even by staff members with no 3D printing experience. We offer 5-hour online training split into 2 sessions (basic + advanced, 2 weeks apart) as a part of the premium service plan.

Are printed parts good enough to be the end products? Or is SLS just for prototypes?

It’s entirely possible to print end products with LisaX! Choosing the right material and adjusting the printing parameters can bring great results in terms of meeting technical requirements for your part. We encourage you to contact us with any questions about your application – our Application Engineers gladly advise you.

Is the technology safe?

SLS is in general very safe technology, as the materials used are for the most part not toxic, and safe to touch. Depending on your workspace setup some basic personal protective measures may be advised. LisaX is a part of the Performance set, which is ATEX certified to be a safe working environment.

Does the machine run on single-phase or three-phase power?

The machine runs on single-phase power.

Reason of contact*

First name*

Last name

Company*

E-mail*

Phone number (optional)

Job title (optional)

Upload o file

Your message*

Sinterit sp. z o.o. is the controller of your personal data.
Providing your data is voluntary, but your refusal to provide us with data marked as mandatory (*) will make us unable to communicate with you via our contact form.

You have the right to request from the Company access to and rectification or erasure of your personal data or restriction of processing concerning your personal data and to object to processing as well as the right to data portability. You have the right to withdraw your consent for processing of your personal data at any time, without affecting the lawfulness of processing based on consent before its withdrawal.

To read all our Privacy Policy please click here

(Optional) I want to subscribe to the Sinterit newsletter
If you subscribe to our newsletter we may process your data (both in and outside EU) to send you informational or marketing content. Providing your data is voluntary, but your refusal will make us unable to send you our newsletter.

(Optional) I agree for my data to be shared with Sinterit distributors and resellers (both in and outside EU) so they can contact me with their offers as well as send me their content.
If you agree for your data to be shared with our distributors or resellers they may also become controllers of your data. They may process your data (both in and outside EU) to contact you with their offers and to send you their informational or marketing content. Providing your data is voluntary, but your refusal will make us unable to share your data with our distributors and resellers and to contact them with you.

First name*

Last name*

Your e-mail*

Phone number

Company name

Industry*

Country*

State

* Information about the processing of your personal data provided to Sinterit by the contact form is here. To read all our Privacy Policy please click here.

By provision of your email address (and other data, if you wish) you agree to receive newsletter from Sinterit sp. z o.o. that may include commercial information e.g. Sinterit Lisa Pro updates, products and services offers, information about exhibitions and use-cases, as well as, from time to time, we may send you inquiries or surveys to ask you about Sinterit and our products. You can find more information about processing your personal data here. To read all our Privacy Policy please click here.

Pricing

Below there are approximate costs for some example models.

Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.

Flexible
Standard

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Soft

TPE

Below

Model volume:

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

51,30 €

Crank

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

49,90 €

Derailleur

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

71,80 €

Driller housing

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

157 €

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Soft

TPE

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

First name*

Last name*

Your e-mail*

Phone number*

Company name

Industry*

* Information about the processing of your personal data provided to Sinterit by the contact form is here. To read all our Privacy Policy please click here.

Lisa X Fast. Versatile. Accessible.

Lisa X

What makes a Lisa X a future-proof investment?

Open architecture

Multi material

Industrial speed and build volume

Industry 4.0 ready

Business benefits

Technical benefits

What is an Open SLS 3D printer?

The temperature distribution is crucial in the Selective Laser Sintering printing process.

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

Alec Bialek

Head of Jetson’s R&D

Lluís Llenas

Regner

Only top quality 3D printing

Technical specification

Materials

Standard prototyping

Performance & Special Applications

Flexible

Sinterit Studio

Dedicated software for all your needs

We developed our software in-house to be a user-friendly assistant for your pre-printing operations, including model positioning. It can also be used with the auto-packing function. In Sinterit Studio you can also choose more advanced options and draw from open parameters.

Sample print prices

We care

FAQ

The powder I’m interested in is not listed as compatible. Can I still use it?

How much can I print in a week?

Is the process complicated? How much training will my staff need?

Are printed parts good enough to be the end products? Or is SLS just for prototypes?

Is the technology safe?

Does the machine run on single-phase or three-phase power?

Knowledge

Contact us via the form

Printers

Solutions

Materials

Contact support

Peripherals

Software

Resources

Pricing

Get a free sample box

Lisa X

Fast. Versatile. Accessible.