Preparation for packing – Lisa X

  1. From the main menu, select CLEAN THE PRINTER and follow the directions.
  2. Remove the split pin and lower the heating module.
  3. Unscrew two quick release nuts.
  4. Take the laser protective glass out and put it in its original box.
  5. Secure the laser module with the protective plastic cover that was removed during the first startup of the printer.
  6. Lift the heating module and secure it with a split pin.
  7. Insert the box with the laser protective glass into the print chamber.
  8. Close the printer lid.
  9. Disconnect the power cable from the printer.