Sandblaster

HEPA filtration and full sealing maintain a dustless environment around the Sandblaster SLS and allow you to post-process while avoiding contact with the powder

Sandblaster SLS is compatible with the ATEX Vacuum Cleaner. Using a special vacuum environment, our unique system separates the abrasive and powder while also removing powder from the chamber

Smooth pressure regulation promotes thorough cleaning of even the smallest and most delicate prints.

The additional manual blasting gun ensures precision, while the wall-mounted blasting nozzle makes it possible to freely rotate objects.The low-mesh grill allows you to work with a series of prints while preventing small parts from getting inside the device.

Large working area: 410 x 310 x 200 [mm]

The industrial cabinet makes working on large prints more convenient and allows them to be conveniently rotated. The whole device is designed to ensure the most convenient work with SLS printouts from Sinterit SLS 3D printers.

Pressure regulation and metering

The built-in pressure meter will help you to set all work parameters precisely. Maintaining the right pressure is crucial particularly if you’re post-processing elements with tiny details.

This level of control ensures consistent results across every print, preserving delicate geometries without the risk of over-blasting or surface damage. Whether you’re cleaning complex lattice structures or preparing parts for final finishing, the Sandblaster SLS gives you the precision you need to maintain the integrity and appearance of your most detailed work.

Specification

Working area

410 x 310 x 200 [mm] (16,1 x 12,2 x 7,9 [in])

Max. pressure

125 [psi] / 8.62 [bar]

Coupling

DN 7.2

Max. abrasive material capacity

4.5 kg [9.9 lbs]

Dimensions

495 x 390 x 410 [mm] / 19.5 x 15.4 x 16.1 [in]

Weight

11.5 [kg] / 25.3 [lb]

Power

6 [W]

Input voltage

230 [V] / 50 [Hz] or 110 [V] / 60 [Hz]

Abrasive material

glass balls 200 [μm]

Required Air flow

300 L/min

Required Pressure

0.5 – 0.86 [MPa] / 5.0 – 8.6 [bar] / 87.0 – 124.7 [psi]

Full specification (PDF)

Sinterit-SANDBLASTER-SPECIFICATION-1.pdf

Sandblaster

Sandblaster SLS

Type

Manual

Working area

410 x 310 x 200 [mm] (16,1 x 12,2 x 7,9 [in])

675 x 450 x 415 [mm] (26.6 x 17.7 x 16.3 [in])

Max. pressure

0.86 MPa / 125 psi

5.0 – 8.6 [bar] / 72.5 – 125.0 [psi]

Coupling

DN 7.2

Dimensions

480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in)

790 x 545 x 765 [mm] (31.1 x 21.5 x 30.1 [in])

Weight

15 [kg] (33 [lbs])

30.5 [kg] (67.1 [lbs])

Illumination

Power

6 [W]

Input Voltage

230 [V] / 50 [Hz] or 120 [V] / 60 [Hz]

110 / 230 [V] AC, 50/60 [Hz]

Daniel Aarts

Technical Director at Innoseal Europe

Sinterit’s Lisa X has allowed us to reduce lead-times and create better solutions — faster, helping us satisfy our customers. We have looked at other 3D printing methods, and other brands, but ultimately decided on SLS and chose Sinterit for their communication, and open material possibility. Something we couldn’t find in other suppliers of affordable entry level SLS printers.

Innoseal case study with Sinterit LISA X

Alberto Parolin

R&D Team Leader in BNP

Getting Lisa X solved a lot of our problems. It has a big enough printing area, so we almost always can print big components in one part. It wouldn’t be possible with competitive SLS 3D printing solutions.

See case study

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

The main reason Somfy reached out for the SLS technology from Sinterit was productivity. Printing many pieces in one batch was a game-changer

SEE CASE STUDY

Alec Bialek

Head of Jetson’s R&D

When we look at Lisa’s line of printers, or Sinterit at general compared to other companies, the two major things that we liked were the materials, that are open source, so we are not locked into one brand […]. We are able to look around the market and use a material that works best for the part.

SEE CASE STUDY

Pricing

Below there are approximate costs for some example models.

Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.

Flexible
Standard

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Soft

TPE

Below

Model volume:

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

51,30 €

Crank

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

49,90 €

Derailleur

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

71,80 €

Driller housing

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

157 €

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Soft

TPE

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Get a free sample box

Universal joint + turbine

The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

These are examples showing high precision and freedom of design ensured by SLS technology.

order free sample box

Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.

SEE ADVANCED samples

Sandblaster

Perfectly smooth surface

Sandblaster

CLEAN

PRECISE

SPACIOUS

Pressure regulation and metering

Specification

Full specification (PDF)

Comparison

Sandblaster

Sandblaster SLS

Illumination

Daniel Aarts

Technical Director at Innoseal Europe

Alberto Parolin

R&D Team Leader in BNP

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

Alec Bialek

Head of Jetson’s R&D

Overcome Your Challenge with the Right 3D Printer

Discover Case Studies

SLS 3D Printers

Peripherals

Materials

Product Ecosystem

Learn

Customers zone

Company

Explore More

Resources

Pricing

Get a free sample box