Cleaning of the space under the Beds – Lisa X

During printing, powder may accumulate in the area under the print chamber. A thin, even layer of powder is no cause for concern. It indicates correct sealing and regular operation of the machine. Powder accumulating in only one place indicates a problem with the sealing of the Beds.

1. Choose UNLOCK DOOR on the printer screen.
2. Open the printer door.
3. Turn the printer off at the power switch and unplug the power cable.
4. Carefully remove the powder from the area under the print chamber. You can use the ATEX Vacuum Cleaner to do this.
5. Close the printer door.

ATTENTION! Vacuum the space under the Beds carefully! Above are the bed motors, which can be damaged during cleaning.